Your home's furnace is essential for ensuring that you do not freeze during the brutally cold winters. However, a furnace is a relatively complex device, and it will be used continuously for many hours, which can lead to a variety of problems. In particular, there are two common problems that people will encounter with their furnaces, but there are often simple solutions for repairing these issues.
What If The Supply Line For The Pilot Light Is Clogged?
A pilot light that will not stay is lit is a problem that most furnace owners will encounter at some point or another. There can be many causes for this problem, but in most cases, it stems from the accumulation of residue on the supply line. This residue comes from gas that did not completely ignite, and as time passes, it can form a thick layer on the supply line's opening.
Fortunately, you can usually repair this problem by removing this residue. To safely perform this routine maintenance, you should turn off the supply of gas to the unit, and you should disconnect any power connections. Using a thin wire, poke a hole through the soot on the opening and leave the wire in the hole while you remove the soot with a damp washcloth. This wire will prevent soot from entering the supply line and causing a clog deeper in the line, but if this step does not work, you will need to have a professional inspect the problem to ensure there is not a leak somewhere in the line.
Why Did The Furnace Suddenly Become Very Loud?
It is not unusual for a furnace to always emit some type of sounds while it is in operation. In most cases, these sounds should not be overly noticeable to residents of the building, but if the system encounters a couple of problems, it may suddenly become loud enough to be heard throughout the home.
If you have noticed your furnace suddenly getting louder, you should carefully inspect the screws that hold any panels onto the unit. Vibrations from the motor can cause these screws to come loose, which can lead to a sudden increase in noise. If tightening these screws does not address the problem, there may be an issue with the furnace's belts or motor. When this is the problem, you should only attempt the repair if you have experience working on these units. Otherwise, you should contact a professional to perform the repair.
Keeping your home's furnace working is essential for maintaining a comfortable temperature in your home when it is extremely cold. By understanding these answers to common problems encounters by furnaces, you should find it easier to help your system avoid these problems and inconveniences. Talk to places like Borter Heating & Air Conditioning Co for more information.
Hi! I'm Adam Burkhard. As a young lad, I never paid much attention to the cleanliness of my environment. Once my first son was born, however, I started scouring the house top to bottom to create the cleanest environment possible. Unfortunately, during that time, I uncovered a serious mold problem in my home. The problem was so bad, it caused my newborn son to develop an allergic reaction. We instantly hired professionals to remove the mold and restore our home to new. Since I was interested in the process, I followed along with each step to learn more. I want to use this site to give people hope about the ability to remove mold without a trace. It's definitely possible to restore a home after mold takes hold behind the walls or under the flooring. I hope you learn lots about mold remediation services from my site.